Sold out
ATW-1302
ATW-1302-3
ATW-1302-2
ATW-1302-4
Load image into Gallery viewer, ATW-1302
Load image into Gallery viewer, ATW-1302-3
Load image into Gallery viewer, ATW-1302-2
Load image into Gallery viewer, ATW-1302-4
System 10 PRO - Rack-Mount Digital Wireless System ATW-RC13 Rack-mount receiver chassis ATW-RU13 receiver unit ATW-T1002 handheld dynamic unidirect...

756,000.00

This item is currently sold out.
System 10 PRO - Rack-Mount Digital Wireless System
  • ATW-RC13 Rack-mount receiver chassis
  • ATW-RU13 receiver unit
  • ATW-T1002 handheld dynamic unidirectional microphone/transmitter
  • Operates outside TV bands
  • 3 Levels of Diversity Assurance
  • Ready to go straight out of the box
“2.4GHZ DIGITAL SYSTEM, 24 BITS/48 KHZ”
The System 10 continuously monitors the activity in the 2.4GHz band and automatically adjusts its own frequencies to avoid interference. Thus, this system works perfectly well in WiFi environments. Also ideal for add channels to an existing installation running on TV frequencies, since the System 10 Pro will not result in intermodulation or interference.
“THREE LEVELS OF DIVERSITY ASSURANCE”
The System 10 provides three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimize immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
“A COMPACT AND EXPANDABLE SYSTEM”
With an RJ12 cable supplied with each system, it is possible to connect up to 5 frames (10 receivers). While many systems can operate without being connected, this is not recommended. Indeed, linking the systems to create a more stable environment in which receivers are coordinated for the reception, transmission and frequency allocation avoids signal loss and optimizes the simultaneous use of the 10 channels.
 








































Overall System
Operating Frequencies 2.4 GHz ISM band
Frequency Response 20 Hz to 20 kHz Depending on microphone type
Operating Range 60 m (200') Open range env. with no interfering signals
Dynamic Range >109 dB (A-weighted), typical
Total Harmonic Distortion <0.05% typical
Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Audio Sampling 24 bit / 48 kHz
Latency 3.8 ms





































Receiver
Receiving System Diversity (frequency/time/space)
Output Connectors (Microphone) Remote Receiver Connector: RJ45
Link Connector: RJ12
Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions 209.8 mm (8.26") W x 44 mm (1.73") Hx 169.3 mm (6.67") D
Weight 940g
Accessories Included Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet





































Handheld Transmitter
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Battery Type Two 1.5V AA (not included)
Battery Life >7 hours (alkaline) (Depending on battery type and use pattern)
Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight 280g
Accessories Included AT8456a Quiet-Flex™ stand clamp

Related products

Recently viewed