Sold out
ATW-1101
ATW-1101-2
ATW-1101-3
Load image into Gallery viewer, ATW-1101
Load image into Gallery viewer, ATW-1101-2
Load image into Gallery viewer, ATW-1101-3
ATW-1101System 10 Stack-mount Digital Wireless System ATW-R1100 receiver ATW-T1001 UniPak® transmitter 2.4 GHz range – completely free from TV inte...

576,000.00

This item is currently sold out.
ATW-1101
System 10 Stack-mount Digital Wireless System
  • ATW-R1100 receiver
  • ATW-T1001 UniPak® transmitter
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, & space
  • Automatic frequency selection
  • State-of-the-art digital receiver for reliable performance
“2.4 ghz digital system, 24 bits/48 khz”
The System 10 continuously monitors the activity in the 2.4GHz band and automatically adjusts the best signal in case of interference with WLAN routers, Bluetooth devices or other HF microphones. The 2.4 GHz frequency band keeps you away from licensing or frequency coordination issues, or frequencies used by DTV and 4G.
“Automatic frequency selection”
The System 10 automatically changes its frequency. Unlike other systems on the market that attach to 2 or 4 frequency, the System 10 will constantly "monitor" the frequencies and switch if necessary. Thus, there are always a good 2 frequencies in the system, and the user does not need to manually intervene.
“A reliable multiplex system”
System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.








































Overall System
Operating Frequencies 2.4 GHz ISM band
Frequency Response 20 Hz to 20 kHz Depending on microphone type
Operating Range 30 m (100') Open range env. with no interfering signals
Dynamic Range >109 dB (A-weighted), typical
Total Harmonic Distortion <0.05% typical
Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
Audio Sampling 24 bit / 48 kHz
Latency 3.8 ms

































Receiver
Receiving System Diversity (frequency/time/space)
Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
Dimensions 190 mm W x 46.2 mm Hx 128.5 mm D
Weight 290g
Accessories Included Power supply





































Belt Pack
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Input Connections Four-pin Locking Connector,
Pin 1: GND,
Pin 2: INST INPUT,
Pin 3: MIC INPUT,
Pin 4: DC BIAS +9V
Battery Type Two 1.5V AA
Battery Life >7 hours (alkaline) Depending on batt. type & use pattern
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Net Weight 100g

Related products

Recently viewed