Capture your sound with the UAD Volt 1 Gen 2 USB Audio Interface, a compact interface for recording music, vocals, podcasts, and other audio on your computer. Its single-input design is a straightforward choice for solo creators and home studios, connecting via USB for a convenient desktop setup.
Add the Volt 1 Gen 2 to your recording workflow and bring your ideas from first take to finished project.
- Tone Shaping Preamp. Get the rich character of a record, not a demo.
- Full 32-Bit Audio. Hear your performance in incredible detail with legendary UA quality.
- Mic & Instrument Inputs. Capture your vocals and instruments at the same time.
- Mobile Ready. Record anywhere with USB bus power — no external power supply required.*
- Easy to Use. Quickly connect and record using your favorite music apps.
- Premium UAD Software. Get the same EQs, compressors, synths, and guitar amps used by the pros, plus the award-winning LUNA DAW.
Specifications
All specifications are subject to change without notice.
I/O
Simultaneous I/O: 2-in / 2-out
Microphone Preamp: One, 60 dB available gain
with Tone Shaping
Monitor Outputs: One stereo
Headphone Output: One stereo (shared monitor mix)
USB: One USB 2.0 Host port
One USB External Power input port – requires 5VDC @ 1A minimum
USB Type-C connectors
Digital / Optical: None
MIDI: None
A/D – D/A Conversion
Supported Sample Rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
Bit Depth: 32
Power
USB Bus-Powered: Yes
Power Consumption (@ 5VDC): 2.4W typical, 3.6W maximum
On / Off Switch: None
ANALOG I/O
Instrument Input 1
Frequency Response: 20 Hz to 20 kHz ±0.03 dB
Dynamic Range (A–weighted): 116 dB
THD + Noise (1 kHz @ -1 dBFS): -101 dB (0.0009%)
Maximum Input Level: 12.5 dBu
Input Impedance: 1 Megohm
Available Gain 60 dB
Connector Type: ¼” TS unbalanced
Microphone Input 2
Frequency Response: 20 Hz to 20 kHz ±0.1 dB
Dynamic Range (A–weighted): 119 dB
THD + Noise (1 kHz @ -1 dBFS): -108 dB (0.0004%)
Maximum Input Level: 14.5 dBu
Input Impedance: 2 Kilohms
Available Gain: 60 dB
Phantom Power: +48V (switchable)
Connector Type: XLR Combo Jack, pin 2 positive
Line Input 2
Frequency Response: 20 Hz to 20 kHz ±0.05 dB
Dynamic Range (A–weighted): 119 dB
THD + Noise (1 kHz @ -1 dBFS): -108 dB (0.0004%)
Maximum Input Level: 22 dBu
Input Impedance: 10 Kilohms
Available Gain: 60 dB
Connector Type: ¼” Combo Jack
TRS balanced or TS unbalanced
Monitor Outputs
Frequency Response: 20 Hz to 20 kHz ±0.04 dB
Dynamic Range (A–weighted): 122 dB
THD + Noise (1 kHz @ -1 dBFS): -111 dB (0.0003%)
Maximum Output Level: 20.2 dBu
Output Impedance: 100 Ohms
Connector Type: ¼” TRS balanced (DC coupled)
Headphone Output
Frequency Response: 20 Hz to 20 kHz ±0.1 dB
Dynamic Range (A–weighted): 121 dB
THD + Noise (1 kHz @ -1 dBFS into 300Ω): -108 dB (0.0004%)
Maximum Output Power into 32Ω: 52 mW
Maximum Output Power into 300Ω: 27 mW
Connector Type: ¼” TRS stereo unbalanced (DC coupled)
SYSTEM REQUIREMENTS
macOS & Windows
Available USB 2.0 (or higher) port
USB cable (included)
Intel, AMD, or Apple silicon processor
Windows 10 64-bit edition or newer
macOS 12 Monterey or newer
Internet connection for software downloads
iPad & iPhone
iPadOS / iOS 16 or newer
DAW Compatibility
All major DAWs, including Ableton Live, FL Studio, GarageBand, Logic Pro, Pro Tools, and more
