The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates.
Technical Specifications
System
| Frequency response | 55 Hz – 18 kHz ±3 dB 50 Hz – 20 kHz -10 dB |
| Nominal dispersion | 90° H x 60° V @ -6 dB points |
| Maximum SPL | 129 dB peak |
| Crossover type | Active |
| Transducers | 1 x 10″ (256 mm) LF driver 1 x 1″ (25.4 mm) HF compression driver |
| Limiter | Independent HF, LF, peak and rms |
Amplifier
| Maximum output power* | 2,500 W |
| Type | Class-D |
| Protection | Short circuit, open circuit, thermal |
Connectors
| Input A / B | 2 x combo jack/XLR |
| Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
| Input impedance | 20 kO unbalanced, 40 kO balanced |
| Maximum input level | +21 dBu |
| Output A / B | 2 x XLR Linked to input |
| Mix output | XLR, balanced |
| Output impedance | 100 O unbalanced, 200 O balanced |
| Ultranet input/link | 2 x RJ45 |
| Mains Supply | Neutrik powerCON input 20A and link 15A |
Controls
| DSP | Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER |
| Mixer section | 2 x gain controls (channels A and B) 2 x Line/Mic switch |
User DSP Functions
| Factory EQ presets | Positioning, Sound mode Sound modeling, FBQ |
| Display | LCD 128 x 32, blue backlit |
| Delay | 0 – 300 ms |
| Equalisation | High and low shelving EQ 2 x parametric EQ |
| Limiter | Zero attack input limiter |
| Presets | 20 total presets, 19 user-definablenable |
| Crossover | High Pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
Ultranet Digital Network
| System | |
| Signal | 16 channels |
| Latency | < 0.9 ms |
| Cabling | |
| Cables | Shielded CAT5 |
| Cable length | max. 246 ft / 75 m recommended |
Power Supply
| Power consumption | 150 W @ 1/8 max power |
| Voltage (fuses) | |
| USA / Canada | 120 V~, 60 Hz (T 15 A H 250 V) |
| UK / Australia / Europe | 220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Korea / China | 220-240 V~, 50/60 Hz (T 10 A H 250 V) |
| Japan | 100 V~, 50/60 Hz (T 15 A H 250 V) |
Enclosure
| Dimensions HWD | 526 x 324 x 316 mm(20.7 x 12.7 x 12.4″) |
| Net weight | 17.2 kg (38 lbs) |
| Construction | Injection-moulded polypropylene enclosure |
| Finish | Black painted |
| Grille | Powder coated perforated steel |
| Flying hardware | M10 x 3 points |
Accessories
| IQ10-WB Steel wall bracket |
Reviews
There are no reviews yet.