Features
IN-8:
140W
Class D Power
37 Hz
Lower Frequency Response
< 1.4% System THD
94 dB @ 1M
114 dB
Max SPL
Features
Co-Axial Midrange and Tweeter
A three-way with impeccable imaging.
8-Inch Woofer
Powerful, clean bass. Crossed over at 330 Hz to make the IN-8 an acoustic point source.
Low Noise Port Tube
Precisely engineered using airflow simulations for powerful bass without port noise.
*Klippel data from AudioScienceReview.com
Because of the IN-8’s coincident architecture, you may notice a dip between 8-10 kHz when measuring with a single stationary microphone. The dip is an on-axis diffraction artifact of the midrange baffle interface. It is evident in on-axis measurements, but not in total sound power. Perception of timbre should be neutral in most rooms. It is not recommended to apply room-correction EQs to the IN-8s based on single point static measurements.
We know. We keep harping on about the “hyper-realistic” imaging of the IN-8. What does that mean?
When you listen to a stereo set of speakers, you’re hearing information about where instruments and players were placed when the material was recorded. Even with purely digital material, producers can manipulate physical locations of elements in the mix, and you will hear these on a stereo recording.
Not only does this allow producers to create interesting spatial effects, but it means that you can work faster and with more confidence. An accurate soundstage lets you “see” each element of the mix in front of you, so you can hear exactly what happens when you make changes.
2-way systems with good waveguides, like Kali’s LP-6 and LP-8, do a good job at conveying this spatial information. However, because the tweeter and woofer on those speakers (and most studio monitors!) are separate, this information gets lost in the space immediately above and below the speaker. This means that at the listening position, you’re not hearing the full stereo picture.
The IN-8 solves this problem. The tweeter and midrange share an acoustic center, and the woofer is crossed over at 330 Hz, so the distance between the woofer and midrange is well under a quarter wavelength at the crossover point. This means that the IN-8 is acoustically a point source. As such, it has the same excellent directivity that the LP-6 and LP-8 have at their sides in a full 360 degrees around the speaker. You’re hearing all of the spatial information at the listening position, so the soundstage that you hear will have every detail that’s present in the mix.
Specifications
Powered: | Yes |
Amp Class: | D |
Power Config: | Tri-Amped |
LF Power: | 60 W |
Mid-Range Power: | 40 W |
HF Power: | 40 W |
Total Power: | 140 W |
LF Driver: | 8″ Poly-Coated Paper |
Mid-Range Driver: | 4″ Optimized Profile Poly-Coated Paper |
HF Driver: | 1-Inch Textile Dome |
Freq. Response (-10 dB): | 37 Hz – 25 kHz |
Freq. Range (±3 dB): | 45 Hz – 21 kHz |
LF to Mid-Range Crossover: | 330 Hz |
Mid-Range to HF Crossover: | 3000 Hz |
Recommended Listening Distance: | 1 – 2.8 Meters |
Max SPL: | 114 dB |
Reviews
There are no reviews yet.