ATW-1311
System 10 PRO – Rack-Mount Digital Wireless System
- ATW-RC13 Rack-mount receiver chassis
- 2 x ATW-RU13 receiver unit
- 2 x ATW-T1001 UniPak® transmitter
- Operates outside TV bands
- 3 Levels of Diversity Assurance
- Ready to go straight out of the box
“2.4GHZ DIGITAL SYSTEM, 24 BITS/48 KHZ”
The System 10 continuously monitors the activity in the 2.4GHz band and automatically adjusts its own frequencies to avoid interference. Thus, this system works perfectly well in WiFi environments. Also ideal for add channels to an existing installation running on TV frequencies, since the System 10 Pro will not result in intermodulation or interference.
“THREE LEVELS OF DIVERSITY ASSURANCE”
The System 10 provides three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimize immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
“A COMPACT AND EXPANDABLE SYSTEM”
With an RJ12 cable supplied with each system, it is possible to connect up to 5 frames (10 receivers). While many systems can operate without being connected, this is not recommended. Indeed linking the systems to create a more stable environment in which receivers are coordinated for the reception, transmission and frequency allocation avoids signal loss and optimizes the simultaneous use of the 10 channels.
| Overall System | |
| Operating Frequencies | 2.4 GHz ISM band |
| Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
| Operating Range | 60 m (200′) Open range env. with no interfering signals |
| Dynamic Range | >109 dB (A-weighted), typical |
| Total Harmonic Distortion | <0.05% typical |
| Operating Temperature Range | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| Audio Sampling | 24 bit / 48 kHz |
| Latency | 3.8 ms |
| Receiver | |
| Receiving System | Diversity (frequency/time/space) |
| Output Connectors (Microphone) | Remote Receiver Connector: RJ45
Link Connector: RJ12 |
| Maximum Output Level | XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV |
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
| Dimensions | 209.8 mm (8.26″) W x 44 mm (1.73″) Hx 169.3 mm (6.67″) D |
| Weight | 940g |
| Accessories Included | Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
| Belt Pack | |
| RF Power Output | 10 mW |
| Spurious Emissions | Following federal and national regulations |
| Input Connections | Four-pin Locking Connector,
Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Battery Type | Two 1.5V AA |
| Battery Life | >7 hours (alkaline) Depending on batt. type & use pattern |
| Dimensions | 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D |
| Net Weight | 100g |
Reviews
There are no reviews yet.