Alesis PHONOLINK
Record your turntable, tape deck, or mixer in stereo to your computer.
PhonoLink makes it easy to direct-connect nearly any turntable, tape deck, mixer, or other stereo, line-level audio source to USB for stereo recording. The AudioLink Series USB-audio cable outputs studio quality stereo, 16-bit, 44.1 kHz digital audio thanks to its internal analog-to-digital conversion system. PhonoLink connects plug-and-play to your Mac or PC for an all-in-one USB audio solution.
Propellerhead Reason Pianos ReFill
The Reason Pianos ReFill gives you three amazing-sounding, highly realistic, hypersampled acoustic pianos with the kind of presence and playability you normally wouldn't associate with sampled pianos. Where other piano libraries leave you with a fixed piano sound that may or may not suit your project, the Reason Pianos ReFill does just the opposite: these pianos were recorded using multiple microphones, leaving the mixing and shaping of your piano sound up to you.
Propellerheads Reason Pianos ReFill Includes:
- Three pianos with pop and rock-friendly sound
- Sampled using six different sets of microphones
- Easily fit into a mix with total control over ambience and mic balance
- Sound great without choking your computer's resources
Rode CLIP1 MiCon Cable Management Clip (Pack of 3)
Three set of MiCon cable clips used to secure the cables to shirt collars and other articles of clothing. The Rode CLIP1 keeps MiCon cables secure, with just enough slack for free head movement, without associated cable noise.
Rode Custom Pin-Head
The Rode Custom Pin-Head Replacement Unpainted Mesh Head is designed to fit the Rode PinMic that can be customized to provide enhanced camouflage.
Rode MiCon Cable
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset and Lavalier microphones and a wide range of wireless systems. Like all MiConTM cables, this 3m (10) length is heavy-duty, shielded and Kevlar reinforced. Black in colour.
Rode MiCon-1 MiCon Connector for Select Sennheiser Devices
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-1 is designed to connect to the Sennheiser transmitters SK 500 G3, SK 300 G3, SK 100 G3, SK 500 G2, SK 300 G2, SK 2 Freeport Sennheiser and the Sennheiser products listed are registered names and trademarks owned by Sennheiser.
Rode MiCon-2 MiCon Connector for 3.5mm Select Stereo Devices
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-2 is designed to connect to a standard 3.5mm stereo minijack, with a power supply of 1V minimum.
Rode MiCon-3 MiCon Connector for Select Shure Devices
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MICON-3 is designed to connect to Shure transmitters UR1, UR1M, ULX1, SLX1, PGX1 and PG1. Shure and the Shure products listed are registered names and trademarks owned by Shure.
Rode MiCon-5 MiCon Connector for 3-pin XLR Devices
The RØDE MiConTM connector system provides seamless integration between the RØDE HS1 headset,PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3 pin XLR, with P48 phantom power.
Rode PinMic
The RØDE PinMic™ is a discreet lavalier/lapel microphone with an innovative pin-through design that is not only easier to conceal than a traditional lapel microphone, but provides greater mounting versatility.
Comprised of a cabled backplate and a removable omni-directional capsule head, the PinMic™ is easily mounted onto any clothing or fabric by simply pushing the backplate pins through the back of the fabric and sliding the capsule into place on the front. The microphone backplate and cable are hidden behind the fabric, and the capsule head can be easily disguised, covered or decorated to further conceal the microphone.
The PinMic™ capsule is discrete at only 9mm deep and 11mm in diameter, and is supplied with both a black and an unpainted silver mesh head that can be further camouflaged by painting.
The microphone easily mounts through any fabric up to 1.5mm (0.006") thick without any damage to clothing. A longer pin version (PinMic-Long) is available for mounting on thicker fabrics (up to 3.5mm/0.14" thick).
The microphone capsule is connected via a 1.2m (4') shielded, detachable Kevlar® reinforced cable that has been rigorously strain tested to ensure reliable performance.
The included mini-furry for high wind protection ensures quality recordings in adverse environments, while the anti-trauma water resistant case provides rugged and secure protection for the microphone, a spare capsule head, the microphone cable and included accessories.
The PinMic™ is an ideal solution for film, television, video, theatre, house of worship and anywhere where a high quality microphone needs to be heard but not seen.
SM Pro Audio XPH4: multi-channel headphone amplifier
Conveniently powered from DC adaptor (optional accessory, not included), and housed in a hardened steel chassis, this robust little beast features 4 high-powered independently controllable headphone amplifiers. A handy Stereo/Mono switch is also provided to for use when required.
All studios require a flexible headphone amplifier to satisfy a multitude of monitoring needs. Sometimes you will need to distribute a stereo signal evenly to 4 sets of headphones. On other occasions, totally different mixes are required on each headphone. The XPH4 gives you an a very flexible affordable solution to take care of all your headphone monitoring needs. Time to get a multi-channel headphone amplifier.