Showing 1–12 of 37 results

Show sidebar
klark-teknik
Close

DN32-LIVE SD/SDHC and USB 2.0 Expansion Module

70,000.00

DN32-LIVE

SD/SDHC and USB 2.0 Expansion Module for 32 Bidirectional Channels of Live Recording/Playback.

The DN32-LIVE SD/SDHC and USB 2.0 Expansion Module for MIDAS M32 and BEHRINGER X32 mixers provides 32-channel bi-directional audio I/O via USB 2.0 for both live performance and studio recording, plus comprehensive remote operation of your DAW via HUI/Mackie Control emulation. The addition of dual SD/SDHC slots allows fully independent recording and playback of up to 32 channels of uncompressed WAV files in consistent sessions – up to the maximum capacity of the SD cards. Now, without the need for a laptop computer, you can capture multi-channel live or session tracks, perform virtual sound checks, add in backing-tracks, set and manipulate accurate markers, and enjoy full remote operation via PC, Android* or iPad* apps, and X-TOUCH control surfaces. All of this barely begins to scratch the surface of what DN32-LIVE can bring to your M32/X32 console.
furman
Close

Furman PL-PRO DM C E

270,000.00
Furman PL-PRO DM C E
Pwr Cond 16A/Lights/ W/SMP Digital Vm/Am (240V)
The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world's most advanced and comprehensive transient voltage surge supressors.
furman
Close

Furman PS-8RE III

200,000.00
The PS-8RE III Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3-step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. One or more Furman PS-8R E II’s may be installed in remote locations and operated via low-voltage wiring.
hosa-technologies
Close

Hosa USB 2.0 Hub

4,000.00
The USH-204 USB 2.0 Hub is used to connect up to four devices to a single computer USB port. Powered via USB, it is ideal for use with external hard drives, audio interfaces, and MIDI controllers. Features include: • Four USB ports capable of burst data transfer rates up to 480 Mbps • Full compliance with the USB 2.0 serial bus interface standard • Backward compatibility with all USB 1.0 specifications
klark-teknik
Close

Klark Teknik DN 100 Active DI-Box

38,000.00
The Klark Teknik DN100 is an active direct box that delivers an extended dynamic range and low noise floor. The DI provides transformer isolation impedance matching and attenuation, into a low impedance active balanced input. The DN100 has extended dynamic range, lower noise floor and all the world-class audio performance you’d expect from Klark Teknik. DN100 is also designed to handle the rigours of life on the road.
konig-meyer
Close

Konig & Meyer 12150 Laptop stand

60,000.00
This Konig & Meyer 12150 Laptop stand comes with height adjustable tripod and ergonomic clamping elements. Your presentation laptop rest plate can be easily attached to the bottom part by a prismatic connection. Includes a clampable mouse rest.
konig-meyer
Close

Konig & Meyer 16080 Headphone holder

3,500.00
Konig & Meyer 16080 Headphone holder for headphones when not in use. The new headphone holder is simply clamped to the tubes of a music stand or microphone stand, etc. and is generally suitable for a tube diameter max. 1.181". The soft rubber support can easily take two sets of headphones. In addition, 2 in-ear headphones can also be hung on the slotted front of the holder. The headphones are close to hand and out of harm's way.
konig-meyer
Close

Konig & Meyer 16310 Headphone wall holder – black

3,750.00
This attractive headphone holder from Konig & Meyer keeps the headphones tidy and close to hand. The soft rubber support can easily take 2 standard pairs of headphones. In addition, 2 in-ear headphones can also be hung on the slotted front of the holder. The metal plate with the four drill holes is simply screwed onto the wall.
konig-meyer
Close

Konig & Meyer 19714 iPad Air stand holder – black 5/8″

10,000.00
The Konig & Meyer 19714 iPad Air stand holder - black 5/8" gives you a clever way to show off your iPad. The mount is guaranteed to hold the iPad (Air, 5th or 6th generation) effectively and safely. For use on stage, in the rehearsal room or at home - the 5/8" internal thread means the holder can be attached to any microphone stand easily and quickly. The iPad is clipped in and out of the holder effortlessly. An easy-to-use wing nut adjusts the tilt so the user can easily find a position to suit them. The iPad switches rapidly between the vertical and horizontal format without slipping.
konig-meyer
Close

Konig & Meyer 210/9 Microphone stand – black

27,500.00

Konig & Meyer 210/9 Microphone stand - black is a more compact version of the classic 210/2. The combination of the long-legged 201A/2 mic stand and the 211/1 telescopic boom arm. Like the 210/2, the 210/9 sets the standard for professional microphone boom stands.

konig-meyer
Close

Konig & Meyer 23850 Microphone desk arm

55,000.00
The Konig & Meyer popular, smooth-running microphone desk arm with 3/8" or 5/8" thread connector for sound studios and multimedia work stations with a new innovative table clamp. Easy to position and suitable for microphones to max. 1.763 lbs. The 196.85 " long microphone cable with a 3 pin XLR plug connector is included in the delivery. Having a clamping range of 0 to 1.889" the clamp is suitable for a wide spectrum of mounting. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.
konig-meyer
Close

Konig & Meyer 23860 Microphone desk arm

80,000.00
This exclusive microphone arm with a 3/8" or 5/8" thread connector in a modern design with a new innovative table clamp for quick and easy positioning of a microphone in the studio or at a multimedia work station. The 236.22" long internally guided microphone cable has a 3 pin XLR plug connector. Microphones to max. 3.307 lbs are easily held in any position. The clamping width of 0 to 1.889" allows the clamp to be attached to a wide variety of surfaces. The stable metal construction with high quality plastic inserts guarantees secure and strong hold. The cleverly shaped clamping parts allow the clamp to be used on smooth surfaces and round-shaped tubes. The microphone arm can also be fixed with the table flange 23855 available as an optional extra.